Tamiya Leopard 1A4: Like Going Home

 

I’ve neglected this blog for far too long, and have been so busy in recent years with my writing career that modelling has taken a back seat. I've completed only two models this year (though worked on at least five others), the first being the Dragon 1:72 Jagdtiger I posted about six months ago. Recently I got to build one that’s been on my to-do list for many years, Tamiya’s 1979 35^th scale tooling of the West German Leopard 1A4 (35112).

The Leopard 1 is still in service in 2025 with some sixteen armies around the world, with new upgrades on offer from many firms, so it’s far from a period piece, despite Australia having retired our Leos in favour of reconditioned M1A1s (not a universally popular decision) many years ago.

Okay, Meng’s much newer kit is far superior, but it’s also correspondingly expensive, and I do enjoy vintage Tamiya for its own sake. The kit is straight-forward though there are one or two bits that can bite you if you’re unwary. Construction follows the standard Tamaya pattern, running gear being suggested to be assembled first, though the wheels form a subset that can be built and detailed separately from the rest and added late in the process if you work that way—I do, as it happens. Upper and lower hulls are large single piece toolings, dressed with smaller parts.

The drive wheels housings are compromised by the kit sharing tooling with the popular early motorised version. I say compromised, they are inherently weak and need to take a lot of force when the tracks are joined and tension thus comes into play. This has never been a problem, however, with superglue making a suitably strong bond.

When I began this project it felt like going home. Muscle memory would just about build it, especially as I built the Flakpanzer Gepard AA tank version back in the 90s, about my third armour kit ever. Construction proceeded without much difficulty, though there were details I wish I'd spotted. The co-axial MG in the turret is not moulded as a proper gun barrel, merely a protruding rounded shape, and I could have at least drilled out the port for appearances.

The tracks took a lot of work. One thinks that one-piece vinyls should be child's play, and they are, but the detail is very repetitious. There are 672 rubber pads—that’s four per link times 84 links per track times two. After a sprayed base coat of rust/dirt browns, every single pad was brush painted rubber black (Tamiya XF-85) by hand, rather a daunting proposition. They were then treated with a Tamiya dark brown weathering wash to create depth, and oversprayed with an ultra-thin glaze of buff (two drops to forty drops of thinner) to create a dust coat. Lastly they got a few touches of MiG powder pigment to suggest fresher rust here and there, and the guide horns were drybrushed metallic. For all this effort, the effect doesn’t really show up in pictures—I might as well have not bothered... Fully half of each track is also behind the side skirts, so I could have detailed only the middle part and saved the effort!

The wheels were masked with a combination of rubber solution and disc stickers, then sprayed rubber black for the tires. I used the template method for the faces of the wheels, a 15mm circle template fitted nicely.

The main paintwork was a mixed shade for German Army Gelbolive, a formula I found at Armorama. XF-51 Khaki Green plus XF-57 Buff plus XF-74 Japanese Olive at a ratio of 4:1:2. This seems a very good match for the original. I made a batch darker with the addition of some black as a shade coat for the underside and behind the running gear, then another batch lightened with extra buff as a fade coat to mottle/pattern the upper surfaces. With all this done, I sealed the surface with Micro Flat. Where the decals would go I splashed with Micro Satin to bring up the lustre and improve adhesion, then resealed with flat over the decals once applied.

The kit decals were quite old but worked very well indeed. They took a while to part from the backing sheet, but snugged down surprisingly well and their finish was very close to that of the paint. They were slightly out of register, so when it came to the crosses, I took some from a Supercsale sheet that were within half a millimetre of the correct size, and these, surprisingly, were glossier and needed more attention to blend in.

The pioneer tools were a fair job in their own right, with a sprayed metallic, brush painted wood tone and hull colour on the clamps, Micro Flat over the hull colour areas, brown oil wash to create a patina on the metal and a darkening effect on the wood.

Finishing techniques included Flory wash in the engraved detail, MiG pigments for dust and rust, and drybrushed metallic for abraded areas, plus the usual suite of oil techniques, being dirt spots and chipping, edge profiling and rust streaks.

I had the advantage of a research source showing the very same vehicle as the kit depicts—a 1984 partwork whose first issue featured a centre spread of the Leo by the talented Kieth Fretwell. On reflection, the kit might have actually guided the illustration, which even shows the wading -kit tower on the commander’s hatch, which is included in the kit as optional parts! I did not bother rigging a radio antenna, as photographs are quite contradictory. Many Leos are photographed without radio masts at all, others have stub antennas only. If I get a definitive source on this I can always add it later.

The Leo looks good, was a fun build—I wish I could have spent a little longer on it: I could have caught some problems before they happened. But it’s a good addition to the modern armour collection. I look forward to doing Revell’s Marder IFV in the same scale, using the same pre-NATO-camo Gelbolive.

If and when I replace my studio lights, I’ll take better photos.

Thanks for looking,

Mike

Kit Review: Academy (Tamiya) StuG IV, #1332

It was about a year ago that I was posting on building this kit and being stunned to find that Academy had thieved most of their early range from Tamiya. I mentioned one or two minor differences that appeared in the building stage, then this kit lay fallow for a long time waiting for its paintjob.

Having just this summer got back to the bench after a quite protracted absence, I have been finishing some shelf-sitters, this one being my fifth in a row. This was my first tri-tone “ambush” scheme and I enjoyed it very much.



The basic vehicle was sprayed overall with XF-60 Dark Yellow, then a slightly darkened version was applied to the hull sidewalls and underside as a shade/dirt colour. The airbrush was changed to the fine tip and needle and Redbrown (XF-64) and Dark Green (XF-26) were sprayed, following the pattern seen in the box photos. Some extra yellow was used to touch up overspray, then a pattern of blowing leaves was applied in the three colours by brush. More yellow was mixed for the fade coat, being thinned 800% overspec as a glaze which was misted onto the upper surfaces, creating the impression of faded paint, and visually tying all three colours together.



The usual suite of techniques was used, being drybrushing with lightened shades of the three main colours on all edges, then drybrushing silver to represent areas of bare metal, washes of black and dark brown oil paint to create rust streaks and dirt accumulations, some washes of orange here and there for fresh, bright rust, graphite dust around the gun muzzle, and so forth. Alliance Modelworks German Vehicle Templates were used to spray the wheel hubs, .015” wire was used for the radio mast, and the muffler was treated with applications of liquid glue and sanding dust to create the bubbled rust effect.



Another variation from the Tamiya original showed up, the spare track links on the lower forward hull had to be back-ground to reduce their thickness by a considerable amount before they would fit the rack, whereas the originals just dropped into place. There are probably other subtle differences here and there, but to all practical ends the model really is identical.



The paint scheme I used is featured on the box photos but the decals for this vehicle, of the Grossdeutschland Division by the looks of the insignia, are not featured in the kit. I brought out the spare markings from the Tamiya example I did about two years ago and did some online research for which StuG IV units were operational in the west in late ’44, and thus good candidates to be wearing the “ambush” scheme. I chose the 251st Assault Gun Brigade, whose colourful eagle badge was on the Tamiya sheet, and while this is obviously a best-guess situation, I feel it’s a reasonable one.



In conclusion, Academy’s knock-off of Tamiya’s StuG IV is an enjoyable build with a few quirks not found in the original but nevertheless a straight forward prospect for anyone with a few projects to their credit. I’m very happy with the result, it looks good, aggressive in its dust and rust, colourful in its blowing-leaves autumn paintjob, and demonstrates once again how much versatility there is in the early Tamiya kits. That’s two of these so far, and I know there’ll be more. Winter markings, full skirts, heavy weathering, mud, stowage, there are plenty of options for depicting these hard-used, hard-fighting workhorses of the Wermacht.

Tracks: A Six-Part Process

It’s been the proverbial age since I last posted, what with completing my PhD, working, and a recent trip to the UK for a conference, but I’m at last back on the bench and have something work talking about.

Tank tracks are an area I’ve discussed on a few occasions, mainly to grumble about link & length and how I detest them. This time I’d like to talk about the finishing techniques that are applicable to all sorts of track approaches.

Building Tamiya’s 1:35 M1A1 (ODS) is a straightforward experience and I superdetailed with 17 corrected or missing detail items (it seems I can’t build an Abrams without adding as many missing details as I can, though I’m nowhere near a full amplification, according to the experts…) The vinyl T-156 tracks are the most accurate of kit offerings but still not correct (the guide horns are centred on the links, when they should straddle the gap between links), but I did not feel like spending the $$ for an AM set, especially as they would be L&L, which I loathe.

Never mind, I can live with the discrepancy. What about making that grey vinyl look like steel that’s been run across a desert?



It turned out to be a six-step process, starting with a base colour (above). I looked at photos of M1s in service and noted the general colour of their tracks, which of course reflects the terrain. I mixed Tamiya Acrylics Buff (XF-57) with NATO Brown (XF-68) and Dark Sea Grey (XF-54) at a ratio of 20:3:3, and coated both sides of the tracks. I tape or pin the tracks to a length of card to control them as I’m doing this.

Step 2 (also above) was the really boring one – paint the track pads and blocks into flat black (XF-1) individually. I used a small, flat sable brush and for once the Tamiya paints behaved themselves reasonably well coming off a brush. The effect does not have to be precise by any means, real tracks are so coated with filth that the point where rubber meets steel is rarely obvious to the naked eye, so I used a near-drybrushing technique across the raised areas, then blocked them in.



An oil wash was the third phase, van Dyke brown suspended in enamel thinner run into all detail areas on both sides, a fairly quick process that created some depth. It’s subtle, but it’s visible above.

The fourth step, also above, was to overspray the tracks with well-thinned Buff (one part paint to three parts thinner, which is 600% over-spec for Tamiya) to simulate dust ground into everything, and which toned down the starkness of the fresh black to a grey-beige which looks pretty good against many service photos.



The job was nearly done by this point. Drybrushing with silver to create bare metal wear on the guidehorns and some external link ends came next, and a light wash here and there of bright rust to add visual interest. Step 6 was MiG Gulf War Sand pigment powder, but that technically would go on overall when everything else on the beast was done, and in the shot above is added to just one part of the right-hand track to demonstrate how it settles into declivities. I called it done at this point and set the tracks aside for later.

Tracks are not difficult to make look good, but it does take a little thought beforehand, and the patience to work through the process when it gets a bit tedious!

Doing It (Not So) Tough

I had thought that I would be calling this “Doing It Tough,” but in the end it wasn’t that hard. I bought Italeri’s M110 SP Howitzer (#291) on sale from Squadron probably 12 years ago, certainly not less than ten, and had a go at a few parts many years ago. It ended up back in the stash because I had nowhere to store a finished model at that time.

I seem to be enjoying a run of completions on old projects lately, and there are a few more to come. This one took a fair bit of effort but nothing out of the ordinary, and a few concessions to the kit’s failings as well as acknowledging my own skills and where they were either not adequate or where I was unwilling to invest the time, eyesight and elbow-grease to achieve that extra standard of realism that is the grail of the hobby.

Italeri comes in for some flak, and not without reason, but that doesn’t mean all their kits can be pigeonholed easily. In recent years their packaging and breadth of subject matter have been impressive, as have their claims to realism and accuracy. Older kits suffer the same maladies no matter what company one considers, and, as with Hobbycraft and early Dragon, Italeri’s kits are best assessed on a one by one basis. Verlinden produced a conversion set (#423) to build the early (short barrel) A1 or late (long barrel) A2, plus stowage boxes, to be mounted on the recoil spade, that Italeri did not include.



The M110 is dated 1996, but the molds may perhaps be older. Certainly the chassis is in common with the M107 which appeared in a couple of editions from the same firm in the 90s. The parts breakdown is fairly normal, though the large number of small parts can be off-putting for some. Here and there were structures that were never going to work, such as the shell trays on the recoil spade bearers: there is insufficient room between their swivel points and the rear of the hull to fit them in their standard orientation.



Construction was generally straight forward, the dark green plastic reacted well to glue and worked well when I dressed the long seams of the barrel with adzed superglue and filler. There were many small, fiddly parts around the gun cradle and tail end, and the instructions were not terribly clear, the illustrations drawn rather small and difficult to see, so that things that should have been obvious were mysteries almost to the finish.

That said, the model went together in an entirely normal fashion. The gun swivel dropped in the same way as a tank turret but the tolerances were very close, even with the surfaces masked to preserve plastic-to-plastic sliding contact they needed filing a bit to get them to seat properly after painting. The small parts, handles and projections, were quite fragile, one had to be repaired twice.



The installation of the drive wheels was not engineered in a foolproof way and I ended up with one frozen in position. That’s no biggie, it’s not as if the tracks are ever going to roll, but having them mobile during track installation eases things. The tracks themselves were well-detailed both sides and took paint well. Italeri tracks are often criticised for lacking detail and being too stiff, but these were quite acceptable, though of course, like any vinyls, are never going to lie down along the top of the roadwheels like the tracks on the real thing. Perhaps someone makes a replacement set for this chassis, but buying tracks that cost more than the kit tends to stick in my craw.



The paintjob was all acrylic, Tamiya XF-62 Olive Drab, with shade and fade coats as per standard, then black and brown oil pinwash and enamel drybrushing in lightened olive and bare metal silver. Orange enamel was pinwashed here and there for bright rust, and MiG Europe Dust pigment was liberally applied last of all.

Italeri made a number of concessions to simplicity, such as molding in the hydraulic and electrical cables around the gun cradle as solid, raised detail, and not all of them are there either. I had considered using fine wire to replace the kit details, but after reviewing every reference picture I could find on the web, as well as some taken for me at a US exhibit, I decided not to. I either would not know where to begin, or where to stop, and in the absence of a Dremmel the idea of carving away all that raised detail added up to (probably) just sore fingers and a mess.



Decals are another area of contention. The Italeri decals are quite matt, and provide markings for four countries, all over standard Olive Drab, but the stern plate of the vehicle is a very cramped place to put markings. Either the model crowds the details too much or the decals are too big, because there was no way the German markings would ever fit into the space available. I used the US marking option and even they barely fitted.



But on the whole, the model had few surprises and was well within my capabilities to produce a decent, if simplified here and there, rendition of this important piece of Western allied artillery from the Cold War to recent times. Examples change hands on eBay for sometimes steeper prices these days, less perhaps because it’s a particularly great kit than because it may be the only kit. I would love to see Tamiya, Dragon or Trumpeter tackle this subject matter!

It’s Good To Finish

The Italeri Corsair is done, which unless I am mistaken constitutes my first finished Italeri kit ever. In some ways it was excellent, in some ways a PITA. The wing alignment defeated me long ago, but now it was nothing to break a sweat about. All the same, this kit had a way of fighting me right to the finish.

Such as… Why are the holes for the drop tank pegs too small, so you have to file them out after the paintjob has been so carefully applied? The pitot tube was moulded with the wing, and there was no way it was going to survive the years. .020” microrod to the rescue, and a little superglue. Same with that row of antennas around the fuselage, it might make sense to fit them before painting but the handling that comes from that point onward is still enough to do for them. They were finagled back into place with CA at the finish, and one which disintegrated before it could even be installed with replaced with 7mm of .020” rod. The original was a blade antenna, this one is rod. Tough.

The canopy masked nicely, but I could have wished it unmasked a bit cleaner. What is it with clear plastic and its ability to gather scratches?



The gear bays were masked after main painting and sprayed with a homebrew interior green (Tamiya XF3 and XF5 at 3:2, works every time), then overspray was touched up on the hull (yes, there was overspray no matter how much masking I used… Like this: )



The tires were brush painted in NATO black, the rim is moulded high enough to guide the brush and inconsistencies are invisible against Dark Sea Blue. Another problem, the main gear seemed to want to sit a bit knock-kneed, so I cut a 50mm spacer bar from styrene strip and braced them apart while the gel CA set up overnight. Now they stand straight...

The gear bays were given a quick black oil wash, then I added a little MiG dust in them, and did the exhaust streaking with their Black Smoke and Vietnam Earth pigments; only the red earth shows up, as you might expect. Hmph – and why is it that you discover when you’re finished that you could use MiG pigments to take fingerprints, because they certainly only show up on the model as you’re putting the finishing touches to it!



One day I might get around to chipping paint with silver but for now I’m just happy to have the project somewhere I’m willing to call the finish line. It’s great to call a completion, file the unused decals and plans, bin the empty sprues and bags, and wipe down the bench ready for the next kit, it brings a sense of progress which few other moments do. This is my first completed Corsair in many years, but I’m sure it won’t be the last, the bent-wing bird is way too much fun to leave alone for long!