It Worked!

Sometimes the manufacturers really do know what they’re talking about… I’ve been working on Tamiya’s 1:12^th scale Suzuki Katana off and on, a 2017 build that’s been on the shelf (full build post to come) and the wheel rims are in bright finish, which Tamiya recommend be done with an X-11 Chrome Silver enamel paint marker pen. I’ve never used their paint markers before and ordered one up with some trepidation, thoughts of floods of paint or dried-up tips going through my mind.

I searched YouTube for how-to videos and found one out of Russia which, though I could follow not a word, was pretty self-explanatory as far as appropriate touch for applying the tip to a surface was concerned. Even so, I put the job off at least a month before there was not one other thing to do on the project before this task.

Of course, when I finally opened the marker, gave it a good shake and started the flow, it worked perfectly. The corner of the chisel-tip seated comfortably into the wheel rim and I applied the paint in short, controlled sections. Before I knew it, it was done and the parts were set aside to dry. Some commentaries have remarked that this can take a long time, into the second day and still tacky, but I find myself wondering if that indicates the paint was insufficiently agitated beforehand. This oaint was dry in an hour.

               

The bright silver rim does not show up very well in the available-light photo at top, and the marker pen, which ships in a plastic shrink-wrap, has been resealed with tape at the cap juncture, to preserve paint life. The picture below shows the front wheel, with a gunmetal finish, and the chrome rim shines beautifully in a flash shot.

When these parts are ready to be handled, I can do most of the remaining build-up, indeed the only painting left to do is the front brake units and the rubber protector around the windshield transparency (fiddly masking required on both). But this project should hopefully come together quite quickly now.

Cheers, Mike Adamson

Kit Review: MPC/Round 2 Space: 1999 MK. IX Hawk

I can’t remember the last science fiction model kit I completed. I have a few in my stash but I actively can’t remember completing one in recent times, so this Hawk is rather a milestone. In the late 70s I did a couple of the very disappointing MPC Eagles (under the Airfix label), and obtained their Hawk as a built example from the famous collector Phil Rae ten or more years back, but brand new kits from this cult TV classic have started to come available in the last few years from Round 2, under the MPC label, as a direct result of interaction between company manager Jamie Hood and both the fans who would be buying the product on one hand, and the leading experts on the originals, on the other. This fusion culminated in the Eagle Transporter kit in 1:48^th scale, which has done great business and spawned a family of secondary releases. The first guest-star hardware to join the family is a 1:72^nd scale Hawk.

The Hawk appeared in the episode Wargames, familiar Earth craft which mysteriously appeared from an alien planet and attacked Alpha. They were mental projections, plucked from the Alphans’ own minds, as was the entire unfolding scenario of destruction, as a means to persuade the humans not to attempt to settle on the planet they were passing, no matter how compatible it seemed. This meant a craft could be designed to reflect the same general era and mode of design as the familiar Eagles, which leant itself to rapid production of the needed models. Two were built, a definitive model scaled to the 1:24^th scale Eagle, and a distance model at 1:48^th scale. They were very different in detail when studied together (both have survived and are well documented photographically, and appear at fan conventions).

Round 2 based their detailing on the “hero” 1:24^th scale Hawk and on inspection I was most impressed with the degree to which almost every detail of the original has been captured at one third the size. I studied the Hawk with a view to building a studio scale replica some years ago, amassing a fair bit of reference material in the process, and as a result I am able to say that the company has captured the important features to an amazing degree. Proportion and detail, including precise replication of the kit parts used as dressing on the original, are all there. The only notable exception I could find was the absence of the ribbing on the Saturn V-derived parts, this being more than likely due to the limitations of moulding technology. When the firm produces the promised 1:48^th scale version to go with the larger Eagle, this omission will hopefully be corrected.

Assembly was quite straight forward, though fit was not as crisp as one might have hoped for, giving rise to some seams to be dressed, mainly on the command module sides and where the fuselage, split in upper and lower halves, comes together just behind the stub wings, and at the rear. Otherwise there were few hassles. The worst parts are the tiny Lunar Module legs, five of which are produced at a third their original size. The originals were forever breaking on the studio model, and these are so fragile you hardly dare breathe on them. The one above the cockpit broke and was repaired four times, while the ones around the engine barely fit (locator holes in the wrong places?) and the modeller is reduced to “superglue and prayer” — not ideal. Whitemetal replacement parts would be highly desirable.

I built the model in subassemblies, the lateral boosters and engine, solar panel and underslung weapons pods, the X-girders, plus the underside girder/rod/pipe parts all being completed separately, including decals and topcoats, and brought together at the end. This eased painting of the fuselage and side boosters, and I noticed that proper alignment of these units to each other depends largely on all parts coming together in one go—so they needed to be fully finished at that point.

In 1:72^nd scale no cockpit is provided, just black decals for the windows. The Hawk’s interior was never shown in the program so any attempt to add one to a kit is an exercise in what-if. It will be interesting to see how the company tackles the issue at larger scale.

The biggest “wow” factor was the decals. The sheet is very finely printed, featuring over 130 markings for the craft as seen on-screen (orange trim) or the prototype model (white overall). I did the latter for simplicity, though picked up two kits and will do the on-screen version at a later date. The decals reproduce every marking seen on the original, including many which were actually drawn on by hand. They behaved very well indeed, were a delight to work with, and reacted well enough to Microscale chemistry. The small coloured bands took some work to wrap around the girders, several applications of Microsol were needed to get them to conform, and they could have done with being somewhat longer to wrap fully and seal to themselves. The anti-glare panel decals were sprayed with Micro Flat and trimmed closely from the backing paper, producing a decent flat finish in those areas, contrasting with the satin finish white I selected overall.

Improvements are always possible, and when I do the second kit I’ll make some small changes. The original had rows of holes drilled into the leading edges of the stub wings, weapon pods and solar panels, and these are represented as silver dots on the decal sheet. Dressing those edges very carefully to fully eliminate mould lines and drilling in the holes is an obvious enhancement. Being forewarned about those LM legs might ease that aspect too.

The model was a pleasure to build, notwithdstanding the acute frustration of those aforementioned LM parts. On the provided stand it looks the part, and is a milestone as the first fully accurate depiction of this craft to be produced as a conventional styrene kit. If the larger version eventuates, it will build upon the experience from this one, and be the perfect compliment to the big Eagle—as surely as the soon-to-be-released 1:72^nd scale Eagle compliments this Hawk.

Full marks to Jamie Hood and Round 2 for giving us the kits we craved long ago and never expected to be possible!

Cheers, Mike Adamson