It Worked!

Sometimes the manufacturers really do know what they’re talking about… I’ve been working on Tamiya’s 1:12^th scale Suzuki Katana off and on, a 2017 build that’s been on the shelf (full build post to come) and the wheel rims are in bright finish, which Tamiya recommend be done with an X-11 Chrome Silver enamel paint marker pen. I’ve never used their paint markers before and ordered one up with some trepidation, thoughts of floods of paint or dried-up tips going through my mind.

I searched YouTube for how-to videos and found one out of Russia which, though I could follow not a word, was pretty self-explanatory as far as appropriate touch for applying the tip to a surface was concerned. Even so, I put the job off at least a month before there was not one other thing to do on the project before this task.

Of course, when I finally opened the marker, gave it a good shake and started the flow, it worked perfectly. The corner of the chisel-tip seated comfortably into the wheel rim and I applied the paint in short, controlled sections. Before I knew it, it was done and the parts were set aside to dry. Some commentaries have remarked that this can take a long time, into the second day and still tacky, but I find myself wondering if that indicates the paint was insufficiently agitated beforehand. This oaint was dry in an hour.

               

The bright silver rim does not show up very well in the available-light photo at top, and the marker pen, which ships in a plastic shrink-wrap, has been resealed with tape at the cap juncture, to preserve paint life. The picture below shows the front wheel, with a gunmetal finish, and the chrome rim shines beautifully in a flash shot.

When these parts are ready to be handled, I can do most of the remaining build-up, indeed the only painting left to do is the front brake units and the rubber protector around the windshield transparency (fiddly masking required on both). But this project should hopefully come together quite quickly now.

Cheers, Mike Adamson