Saturday, February 16, 2019

Recently Completed Dragon 1:35 Kugelblitz (#6040, ’39-’45 Series)



This is my second completed Dragon armour kit, and ironically another on the Pz. IV running gear. The last was their Brummbar, Series II, a few years back. I’ve always fancied the “Ball Lightning/Fireball” antiaircraft tank from the very end of the war, the futuristic dome-like turret catches the attention, so unlike the suicidally open fighting compartments of earlier designs. I was delighted to snag Dragon’s kit on eBay a few years back, as I didn’t fancy trying to scratch-build the turret on a standard Pz. IV chassis (ala Tony Greenland).


The kit is built out of the box with the exception of replacing the indie-link tracks with Tamiya vinyls – my ability to handle indie-link tracks is a matter of record. I’m giving it a go on a kit for which no substitute is available, but it’s very experimental, and changing out the plastic for vinyl makes the current project possible for me. Okay, the tracks are a tiny bit tight, resulting in some toe-in on the idler wheels, but that’s it.



This is a 2018 build which got as far as the base coast of the camo before New Year. The paint scheme is based loosely on that created by Tony Greenland for his conversion/scratch project many years ago, but developed into something fairly original as I went. The paintwork features Tamiya acrylics, with the base coat faded for a scale effect, then oversprayed with XF-11 for the dark green and XF-64 rotbraun, both thinned over the odds and delivered at higher than usual pressure to achieve a reasonably tight pattern. The yellow was retouched to fix overspray and better define the balance between the shades, then a 5% dark yellow glaze was added over the upper surfaces to tie the camo together. The lower surfaces received a similar glaze of brown/black to create a road grime base.



One new technique I worked with here, I wanted a fairly fresh vehicle with some subtle lustre on the paint, more subtle than Microscale’s Flat would provide, so I used a couple of coats of straight X-20A acrylic thinner over the paintwork. It seemed to do the trick, evening the surface at a fine scale so it picked up a low sheen. Conversely, the underside gave issues of excess luminosity – after the oil wash was done to create dirt, oil and rust streaking, the mineral thinners left the whole undercarriage shining with a high satin look, so I sprayed Tamiya XF-86 Clear Flat – which did not in fact pull the shine down as far as I would have liked. The overall upper paintjob is fresh and chipping is minimal but there’s a good build-up of road grime behind the running gear, plus exhaust carbon from intensive work-up on the firing ranges. I profiled all edges with pale yellow oils, but did no topside rust streaking and only minimal dirt spotting.



Dragon’s over-complicated approach was not very apparent in this kit, the assembly seemed quite logical, but the on-vehicle tools were a headache, just as they were on the Brummbar. The plethora of variants the company squeezes from the same molds necessitates a constellation of holes and slots on the underside of the sponsons which you drill out as appropriate to the subject, to receive the tool pins. This is fine in theory but not in practice – when you have holes for parts with no pins and pins with no corresponding holes at all, or a tool with two locator pins, one on each side, it really smacks of amateurishness, or overambitiousness at best. The tools also interfered with each other here and there – the tolerances are too fine.



The decals were not up to much. As the real thing never got beyond prototype stage, the idea here was to represent a trials vehicle, so no divisional markings were required (national insignia only). I raided the brilliant decal sheet from the Brumbar for balkenkreutzers, which went on without a hitch.



The finished model looks good, with minimal pigment work, and the Dragon indie tracks will provide Pz. IV links for other projects for years to come – I have a StuG IV to do featuring lots of extra track lengths as appliqué armour and I expect many will be assembled from this kit. My next Dragon? Not sure, but possibly a Nashorn, another chance to do the track switch-out. Yes, the new Tammy kit is fantastic, but the Dragon is already in the stash.

Cheers, Mike Adamson


No comments:

Post a Comment