Tow cables – most armoured vehicles carry them, those tough bowden-cable connectors used by engineers’ tractors to pull armour out of the mud. They’re not the easiest things for companies to tool out in plastic, and many solutions have been tried, including “heat and bend to shape” or Tamiya’s infamous string option. There has to be a better way, and braided picture hanging wire has often been used, yet the degree of twist is not to scale.
Polish firm Eureka XXL came to the rescue several years ago with their hand-made replacements, and it would be hard to imagine what more you could want. Typically, the end shackles are moulded in resin, while the cable itself is soft copper made just like the real thing, fine strands twisted around a heavier core wire. The copper is soft enough to bend readily, and to length-trim with a knife.
Using them is a breeze. Spray the end pieces on their resin pour block, crack them away (you don’t even need to saw or cut them free), prepaint the copper with your favourite metallic/rust effects, then superglue into one connector. Lay the cable on the vehicle, arrange with as much sag as you like, mark the correct length for the other end and trim with a knife; glue on the other end and glue to the model. But for final rust, dust and dirt effects, you’re done and the cable looks absolutely convincing because it is what it is supposed to be, spiral-braided metal.
Eureka have a huge range, and lots more for the armour fan than just cables. Check them out at:
It’s been three months since my last post, during which a few models have been finished, a trip to the UK happened (including a sci-fi modelfest visit, expect a report before long!) and a house-move-from-hell which has nonetheless resulted in a better mancave than before, including a proper display case for the first time. Sorry about my lack of blogging, normal service will hopefully be resuming at this time…
No comments:
Post a Comment